Need help?Do you have a question about the Atlas Copco PNS 1250 Cud S3A/T3 APP and is the answer not in the manual?
General| Brand | Atlas Copco |
|---|---|
| Model | PNS 1250 Cud S3A/T3 APP |
| Category | Air Compressor |
| Language | English |
Overview of Atlas Copco's safety policy and manual usage.
Essential rules for operating and maintaining the compressor safely.
Procedures for safe towing, lifting, and unit placement.
Guidelines for safe compressor operation, air handling, and noise exposure.
Precautions for performing maintenance and repair work safely.
Guidance on using the correct tools for maintenance and repair.
Safety guidelines for batteries, piping, and safety valves.
Explains the meaning of safety symbols used in the manual.
List of common abbreviations found in the manual.
Defines important terms and components used in the manual.
Clarifies directional terms like front and rear for unit orientation.
Overview of the PNS 1250 Cud compressor unit's basic design.
Explains various markings and labels on the compressor for identification and warnings.
Details on engine, compressor elements, cooling, fuel, and safety systems.
Information on the Pc4003™ controller and fuse details.
Explains the air, cooling/lubricating oil, fuel, and water systems.
Guidelines for safe unit transport via trailer and lifting operations.
Instructions on how to park the compressor safely and securely.
Essential pre-start checks for oil, coolant, fuel, battery, and air filters.
Guide to controller buttons, display icons, views, and settings for operation.
Step-by-step process for engine cranking, warming up, and loading.
Detailed steps for safely stopping and shutting down the compressor unit.
Overview of main components, operation, control module, and daily checks.
Recommended service intervals for various components and kits.
Procedures for checking and changing engine oil and filters.
Procedures for checking and changing compressor oil and filters.
Detailed steps for coolant, air filter, fuel system, battery, and valve servicing.
Recommended fuel, oil, and coolant types for the engine.
A chart to help diagnose and resolve mechanical and electrical issues.
Safety guidelines related to the battery and alternator connections.
Common symptoms, possible causes, and corrective actions for compressor issues.
Information on process data and fault codes for the control module.
Lists sensors that trigger engine or apparatus shutdowns.
A cold start option consisting of heater plugs for engine and gearbox.
Allows compressor operation in higher ambient temperatures.
Limits operating pressure for handheld pneumatic tools.
Specifies fuel suitable for low ambient temperatures.
Guidelines for storing the compressor unit when not in use.
Atlas Copco's approach to minimizing environmental impact of products.
Procedures for disposing of contaminated substances and machine components.
Recommended torque settings for general and specific assembly applications.
Specifies set points for various safety and shutdown parameters.
Performance data, operating conditions, and consumption rates for the unit.
Table for converting SI units to their British equivalents.
Details found on the unit's data plate and their meanings.
To Next Page