Atlas Copco Air Compressor - User Manual

Instruction book
2920 1521 00 1
Atlas Copco Stationary Air Compressors
Instruction book
SF1 - SF2 - SF4 Skid -Tank-mounted
SF6 - SF8 Twin
SF6 - SF8 - SF11 - SF15 Multi
Copyright 2003, Atlas Copco Airpower n.v, Antwerp, Belgium.
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in
particular to trademarks, model denominations, part numbers and drawings.
This instruction book meets the requirements for instructions specified by the machinery directive
98/37/EC and is valid for CE as well as non-CE labelled machines.
No. 2920 1521 00
Registration code: APC SF / 38 / 980
2003-10 www.atlascopco.com
Note: The PED instructions for this machine are included at the end of the book.

Summary

1 LEADING PARTICULARS

1.4 Regulating System Overview

1.5 SF Multi Regulating System

Control system for SF Multi models.

1.5.5 Control Panel Interface

2 INSTALLATION

2.3 Electrical Connections

Wiring diagrams and connection procedures.

3 OPERATING INSTRUCTIONS

3.1 Initial Start-up Procedure

3.2 Compressor Starting

How to start the machine safely.

3.4 Compressor Stopping Procedures

4 MAINTENANCE

4.2 Preventive Maintenance Schedule

Routine checks and service intervals.

6 PROBLEM SOLVING

Troubleshooting Compressor Operation Issues

Addresses start, capacity, overheating, and motor problems.

Troubleshooting Safety and Pressure Issues

7 PRINCIPAL DATA

Electrical Specifications (Cables, Fuses, Relays)

Operational Parameters and Limitations

Compressor Performance Data

8 SF MULTI REGULATOR FUNCTIONS

8.1 Menu Navigation and Control Programs

Navigating the regulator interface and programs.

8.3 Status Data and Alerts

Handling shut-down, warning, and service messages.

8.7-8.11 Parameter, Protection, and Clock Settings

Modifying operational parameters and timers.

8.12 Configuration and Service Menus

Atlas Copco Air Compressor Specifications

General

Brand	Atlas Copco
Model	Air Compressor
Category	Air Compressor
Language	English