- 32 -
4.2 Parking
– Locate the wind direction and place the rear end of
the unit upwind, away from contaminated wind
streams and walls. Avoid recirculation of exhaust
air from the engine. This causes overheating and
engine power decrease.
– Park the unit on solid level ground. The
compressor can operate in a slant position not
exceeding 5° (in both senses: front/rear and left/
right).
– Engage the parking brake by pulling parking
brake handle (1).
– Place wheel chocks in front of and behind the
wheels before the unit is disconnected from the
towing or lifting vehicle.
– Lock the towbar (2) in the raised position with
catcher (3).
To Next Page
Loading...
