- 55 -
Notes:
– The initial service pak, which has been supplied
with the unit, should be performed after the first
50 hours.
– For grey-marked service activity intervals, new
parts are included in the service pak mentioned on
top of the column.
(1) More frequently when operating in a dusty
environment.
(2) Engine oil change interval can be increased until
500 hrs depending on fuel consumption over that
period of time.
6.1.1 Use of preventive maintenance
schedule
The maintenance schedule contains a summary of the
maintenance instructions. Read the respective section
before taking maintenance measures.
When servicing, replace all disengaged packing, e.g.
gaskets, O-rings, washers.
The maintenance schedule has to be seen as a
guideline for units operating in a dusty environment
typical to compressor applications. The maintenance
schedule can be adapted depending on application,
environment and quality of maintenance.
6.1.2 Service paks and kits
6.1.2.1 Service paks
Service paks include all genuine parts needed for
normal maintenance of both compressor and engine.
Service paks minimise downtime and keep your
maintenance budget low.
Order service paks at your local Atlas Copco dealer.
6.1.2.2 Service kits
A service kit is a collection of parts to fit a specific
repair or rebuilding task.
It guarantees that all necessary parts are replaced at
the same time which improves the uptime of the unit.
Atlas Copco service kits offer you all the benefits of
genuine Atlas Copco parts, save on administration
costs and are offered at a reduced price compared to
the loose components.
The order numbers of the service paks and kits are
listed in the Atlas Copco Parts List (ASL).
Contact your local Cummins
support for more information and
make sure to have their agreement
to increase oil change interval.
Keep the bolts of the housing, the
lifting eye, the towbar and the axle
securely tightened.
Refer to “Technical specifications”
on page 83 and to “Torque values”
on page 83.
Contact Atlas Copco.