Atlas Copco SFD 22+ User Manual

• Select the Local Area connection (1), which is connected to the controller.
• Click with the right button and select properties (1).
• Use the check box Internet Protocol (TCP/IP) (1) (see picture). To avoid conflicts, uncheck
other properties if they are checked. After selecting TCP/IP, click on the Properties button
(2) to change the settings.
Instruction book
66 2920 7140 52

Atlas Copco SFD 22+ Specifications

General

Brand	Atlas Copco
Model	SFD 22+
Category	Air Compressor
Language	English