Atlas Copco STbench System Overview Manual

STbench EN Introduction
© Atlas Copco Industrial Technique AB - 9839 0879 01
11
Software version Change
02.00x
■
Security windows machine added (for more information, see "STbench
with PC Configuration Manual / STpad Configuration Manual").
■
General information updated (for more information, see "STbench with
PC Configuration Manual / STpad Configuration Manual").
■
Parts added (for more information, see "STbench with PC Configuration
Manual / STpad Configuration Manual").
■
Visual inspection (attribute, binary and dimensional) added (for more in-
formation, see "STbench with PC Configuration Manual / STpad Config-
uration Manual").
■
Cm/Cmk and SPC only angle inspection added (for more information,
see "STbench with PC Configuration Manual / STpad Configuration
Manual").
■
Battery status indicators and Battery Charger switch updated (for more
information, see "STbench Operation Manual").
■
Tilting top plate added (for more information, see "STbench Operation
Manual").
■
Printing support added (for more information, see "STbench Operation
Manual").
■
Monitor support added (for more information, see "STbench Operation
Manual").
■
Flange for SRTT-B added (for more information, see "STbench Opera-
tion Manual").
■
Forklift added (for more information, see "STbench Operation Manual").
■
Installing Articulated arm added (for more information, see "STbench
Operation Manual").
■
Technical specifications updated (for more information, see "STbench
System Overview Manual").
■
General information updated (for more information, see "STbench with
PC Troubleshooting and Service Manual").
01.03x
■
GDPR Compliance (for more information, see "STbench with PC Config-
uration Manual / "STbench System Overview Manual" / "STbench Oper-
ation Manual" / "STbench with PC Troubleshooting and Service Man-
ual")
■
VDI/VDE 2645-2 added (for more information, see "STbench with PC
Configuration Manual / STpad Configuration Manual")
■
Cp/Cpk inspection added (for more information, see "STbench with PC
Configuration Manual / STpad Configuration Manual")
■
SPC (joint) inspection added (for more information, see "STbench with
PC Configuration Manual / STpad Configuration Manual")
■
Pairing and connecting STwrench added (for more information, see
"STbench with PC Configuration Manual / STpad Configuration Man-
ual")
■
Technical specifications updated (for more information, see "STbench
System Overview Manual")
■
Articulated arm added (for more information, see "STbench Operation
Manual")

Atlas Copco STbench Specifications

General

Brand	Atlas Copco
Model	STbench
Category	Test Equipment
Language	English