To Next PageTo Next Page
Need help?Do you have a question about the Atlas Copco STbench and is the answer not in the manual?
General| Brand | Atlas Copco |
|---|---|
| Model | STbench |
| Category | Test Equipment |
| Language | English |
Provides overview of STbench capabilities, test protocols, and hardware components.
Details the purpose and scope of the operation manual for end-users.
Details changes and updates across different software versions of the STbench.
Identifies and describes the various user interfaces and components of the STbench.
Details the STbench PC and Docking Station, including hardware requirements.
Describes the top plate, hydraulic brakes, and static torque transducers for tool testing.
Explains the functionality and operation of the tiltable top plate for horizontal testing.
Details the optional wrench rig accessory for applying torque to wrenches.
Describes the Articulated Arm for extending the STbench's testing range.
Explains the Motorized Cell for automating torque wrench tests and reducing operator influence.
Lists accessories stored in the STbench drawers, such as adapters and simulators.
Describes the main panel as the primary interface between the STbench and the operator.
Explains the battery status LEDs and the operation of the battery charger switch.
Details the function of the Ethernet port for connecting the STbench to a network.
Describes the serial cable port for calibrating Power Focus and Power MACS systems.
Explains the use of USB 2.0 ports for connecting external peripherals like mice and memory sticks.
Details the external transducer sockets for connecting torque and angle sensors.
Explains how to use the Start PC and Stop PC buttons for powering the STbench on and off.
Describes the power supply socket and requirements for connecting AC power.
Details the keyboard and embedded mouse for data input into the STbench software.
Explains the use of the handlebar for moving the STbench to different workstations.
Describes the optional printer support accessory for label printing.
Details the foldable monitor support for easier transportation and storage.
Explains how to assemble the flange for an additional SRTT-B transducer.
Describes how to move the STbench using a forklift and specific devices.
Provides an overview of the steps required to set up a new STbench.
Details the procedure for charging the STbench battery, including LED indicators.
Explains how to power on the STbench with PC and STbench with Docking Station.
Describes the STbench's automatic switch to power saving mode after inactivity.
Details the procedures for powering off the STbench with Docking Station and with PC.
Provides essential safety warnings related to operating the STbench, including wheel brakes.
Lists devices and configurations needed for calibrating a power tool with Power Focus.
Details the devices and configurations required for calibrating a power tool with PowerMACS.
Lists the devices and firmware versions needed to calibrate a power tool with a generic controller.
Explains the Articulated Arm's function to increase the STbench's operating range.
Provides detailed technical specifications for the Articulated Arm accessory.
Covers crucial safety guidelines for installing and using the Articulated Arm.
Step-by-step instructions for mounting the Articulated Arm onto the STbench.
Procedure for installing the brake component onto the Articulated Arm.
Instructions for rotating the brake to suit the testing tool's position.
Guide on how to perform a test using the brake on the Articulated Arm.
Provides instructions and warnings for cleaning the STbench safely and effectively.
Specific guidance on cleaning the STbench touch-screen panel.
Recommends battery replacement frequency and how to proceed.
Recommends oil replacement frequency for the hydraulic circuit.
Advises on creating database backups and contacting customer IT.
Explains causes and solutions for the 'Zero Static Error' message.
Details causes and solutions for the 'Over Torque Error' message.
