Operation Overview EN STbench
20
© Atlas Copco Industrial Technique AB - 9839 0880 01
Articulated arm
The “Articulated Arm” provides a transducer installed in the upside-down position. This configuration al-
lows to execute tests in special applications where the tools cannot be tested with the standard bench.
Motorized Cell
The Motorized Cell is a torque transducer that can be installed on the STbench large frame in order to au-
tomatize torque wrench tests, thus reducing the operator influence on the measurements.
The Motorized Cell is fully compliant with ISO 6789:2017.
To Next Page
Loading...
