- 61 -
Maintenance schedule (km)
(continuation of page 60)
Daily 50 km
after initial
start-up
Every
500 km
Every
1000 km
Every
2000 km
Ye ar ly
Drain ABS vessel (option) x
Check coupling head x
Check tyre pressure xxxxx
Check torque of wheel nuts x x x
Check height of adjusting facility x x x x x
Grease coupling head, tow bar bearings at the housing of the overrun
brake
xxx
Check brake system (if installed) and adjust if necessary x x x
Oil or grease brake lever and moving parts such as bolts and joints x x x
Check/Adjust lateral play of wheel bearing x x x
Check tyres for uneven wear xx
Grease sliding points on height adjusting parts xx
Check safety cable for damage xx
Check Bowden cable on height adjustable connection device for
damage
xx
Lubricate torsion bar axle trailing arm xx
Check hub cap for firm seating xx
Change wheel hub bearing grease x
Check brake lining wear x
To Next Page
Loading...