Need help?Do you have a question about the Atlas Copco XRVS 1050 CD4 C3 WUX and is the answer not in the manual?
General| Model | XRVS 1050 CD4 C3 WUX |
|---|---|
| Type | Rotary Screw Compressor |
| Working Pressure | 150 psi (10.3 bar) |
| Weight | 18, 519 lb (8, 400 kg) |
| Dimensions (L x W x H) | 228 x 95 x 103 in (5, 791 x 2, 413 x 2, 616 mm) |
| Drive Type | Direct Drive |
| Motor Power | 75 kW |
General guidelines for safe operation, maintenance, and handling of the compressor.
Procedures and precautions for safely moving and setting up the compressor unit.
Safety measures to follow while the compressor is in operation.
Guidelines for safe practices during maintenance and repair activities.
Safe usage principles for tools when working with the compressor.
Detailed safety measures for specific components like batteries and pressure vessels.
Identification of built-in safety features that protect the unit.
Procedures for safely parking, towing, and lifting the compressor unit.
Specific guidance on how to properly lift the compressor.
Pre-operational checks and procedures before initial start-up or after standstill.
Step-by-step guide for starting the compressor, including pre-start checks and engine warm-up.
Procedures for safely stopping the compressor, including cooling down.
Steps for controlled shutdown and powering off the unit, including battery switch usage.
How the DPF regeneration process operates automatically based on soot load.
Consequences and actions when soot load increases due to inhibited or insufficient regeneration.
Steps to manually initiate the DPF regeneration process.
How to acknowledge and clear active alarms on the control panel.
Safety measures to observe before starting maintenance work.
Overview of recommended maintenance intervals based on hours or calendar time.
Detailed schedule for compressor maintenance tasks.
Recommended synthetic compressor oils, types, and order numbers.
Recommended engine oils (PAROIL E xtra, PAROIL E) and their specifications.
Detailed procedure for changing compressor oil and filters.
Steps for flushing the compressor oil system when changing oil types.
Details on the recommended coolant, its properties, and applications.
Troubleshooting steps for low compressor capacity or pressure issues.
Diagnosing and resolving issues causing over-pressurization.
Troubleshooting causes for the unit stopping unexpectedly via a shutdown switch.
Identifying and fixing causes of air and oil mist discharge from filters.
Causes and solutions for compressor overheating problems.
Troubleshooting steps for when the heater fails to start or shuts off.
Diagnosing and resolving issues with the Oiltronix electronic oil management system.
Reference conditions and limitations for compressor and engine performance.
Performance metrics including engine speed, air delivery, and fuel consumption.
Procedures for safely disposing of fluids, batteries, and machine parts.
To Next Page