- 34 -
- Battery voltage
This view shows the battery voltage and the
running hours.
- Service Timer 1 & Service Timer 2
This view shows both Service Timers. The
Service Timer indication is shown when service
time has run out.
The Service Timer indications counts upwards
and gives an alarm when the set value is reached.
- LOG list
This view shows the alarm memory and gives
access to it.
- Xc2002 Event LOG #01
- Xc2002 Event LOG #02
This view shows the event log and the service
timer.
The event log will be stored upon shutdown or
service timer acknowledgement.
Emergency stop log will be stored separately
- Alarm list
- contains a list of active alarms
This view shows the number of active alarms and
gives access to them.
An overview is given in "Alarm Display (pop up
window)" on page 37.
- Parameter list
This view shows a number of Parameter settings
and gives access to them.
The Parameter Menu's are pre-programmed!
A password will be requested for when an attempt
to change a setting is about to be done (user
password = 2003)
Menu's shown on the Parameter list LCD:
- Language
This view shows the language in use and with
scroll UP or DOWN a list of available languages
and gives access to them.
Icons is the default factory set language, however
6 other languages can be selected: English,
French, Spanish, German, Italian and Cyrillic
(Russian). All information in the Parameter List
display is always in English.
Battery 12.0V
00000.h
Service 1 500 h
Service 2 1000 h
LOG list
Xc 2002 EVENT LOG #01
New software dl
Time: 000000 h
Alarm list
0 Alarm(s)
Parameter
Language
Icons
To Next Page
Loading...