Reference Designation Function
(2) Service The service menu contains the Service information. The ‘Clean
screen’ function can be used to clean the touchscreen.
(3) Week timer Multiple Week timers and a Remaining running time can be set
through this menu.
(4) Event history In case of an alarm, the Status information of the unit is saved and
can be viewed through this menu.
(5) Machine settings Alarms settings, Regulation settings and Control parameters can be
changed through this menu. Auxiliary equipment parameters can
also be changed.
The Auto restart function can be set through this menu. This function
is password protected.
(6) Controller settings Network settings, Localisation settings and a User password can be
set through this menu. There is also a Help page available and the
Controller information can be shown.
Menu structure
Operating the controller can be done by swiping through screens and tapping icons or menu
items.
This is the main menu structure. The structure can be different depending on the configuration of
the unit.
Instruction book
AIF999999 29
To Next Page
Loading...
Need help?
General
