Atlas Equipment OH-10X

Other manuals for Atlas Equipment OH-10X

Installation & Operation Manual34 pages

Questions and Answers

D
Darrell RuizAug 4, 2025
Why motor does not run on Atlas Equipment Lifting Systems?
- C
  Catherine WilliamsAug 4, 2025
  If the motor of your Atlas Equipment Lifting System doesn't run, it could be due to several reasons. First, the button might not be working, in which case you should replace it. Another potential cause is poor wiring connections; repair all wiring connections to resolve this. The motor itself could be burned out, requiring repair or replacement. A damaged Height Limit Switch or a burned-out AC Contactor could also be the culprit; replacing these components may solve the issue.
Q
qavilaAug 10, 2025
What to do if Atlas Equipment OH-10X Lifting Systems raises slowly?
- P
  paulmcgeeAug 10, 2025
  If your Atlas Equipment Lifting System raises slowly, several factors could be responsible. A jammed oil line can restrict flow, so cleaning the oil line is recommended. Low voltage to the motor can also cause slow lifting; check the electrical system. Air mixed with the oil can reduce hydraulic efficiency, so fill the tank. A leaking gear pump will cause a pressure drop, so replace the pump. Finally, overloading the lift beyond its capacity will cause it to raise slowly, so check the load.
A
Amy BrennanAug 15, 2025
What to do if motor runs but the lift is not raised in Atlas Equipment OH-10X Lifting Systems?
- J
  Jason CrossAug 15, 2025
  If the motor runs but your Atlas Equipment Lifting System isn't raising, here's what might be happening: * The motor could be running in reverse; reverse two power wires. * The gear pump might be out of operation; repair or replace it. * The release valve may be damaged; repair or replace it. * The relief or check valve could also be damaged; repair or replace them. * The oil level might be low; fill the tank.
R
Ricky HicksAug 22, 2025
Why Atlas Equipment OH-10X Lifting Systems lift does not stay up?
- M
  Michelle HawkinsAug 22, 2025
  If your Atlas Equipment Lifting System isn't staying up, the issue might be with the release valve, which may be out of work and needs repair or replacement. Alternatively, there could be leakage in the relief valve or check valve, requiring repair or replacement. Cylinder or fittings leaks can also cause the lift to descend; repair or replace the leaking components.
M
Michael GloverAug 28, 2025
How to fix Atlas Equipment Lifting Systems if lift cannot lower?
- D
  dwilsonAug 28, 2025
  If your Atlas Equipment Lifting System cannot lower, it might be due to a few reasons. The safety devices might be locking, in which case you should release the safeties. A damaged release valve can also prevent lowering, so repair or replace it. If the safety cable is broken, replace it. Finally, a jammed oil system can obstruct the lowering process, so clean the oil system.

Summary

Specifications

OH-10 X Model Features

Details of the OH-10X Clearfloor Direct-Drive model features and design.

Installation Requirements

Tools Required for Installation

Lists the necessary tools for the installation process.

Concrete Specifications for Installation

Details concrete requirements for safe lift installation.

Power Supply Requirements

Specifies power requirements, including voltage and breaker size.

Steps of Installation

A. Location of Installation

Guidance on selecting the appropriate installation site.

B. Installation Layout Marking

How to mark the installation layout using a chalk line.

C. Part Verification Before Assembly

Instructions for verifying all parts are present before assembly.

D. Component Unpacking and Initial Handling

Procedures for unpacking and carefully moving the lift components.

E. Column Disassembly and Parts Organization

Steps for disassembling packaging and organizing components.

F. Parts Bag Check and Power Column Positioning

Verifying parts bag contents and positioning the power side column.

G. Hydraulic Hose Connection

Steps for connecting the hydraulic oil hoses to the cylinders.

H. Equalizing Cable Connection

Instructions for connecting the cables that equalize the lift carriages.

I. Column Positioning and Anchoring

Detailed steps for positioning and anchoring the lift columns securely.

J. Overhead Beam Assembly and Plumb Check

Assembling overhead beams and verifying column verticality.

K. Limit Switch and Control Bar Installation

Installing the overhead limit switch and control bar for safety features.

L. Safety Cable Installation

Steps for installing the safety cable system for secure operation.

M. Main Lift Cable Installation

Instructions for installing the primary lift cables.

N. Hydraulic Oil Hose Routing and Assembly

Detailed steps for routing and assembling hydraulic oil hoses.

O. Power Unit and Oil Hose Mounting

Mounting the power unit and connecting the hydraulic oil hoses.

P. Lifting Arm Attachment and Arm Lock Adjustment

Procedures for attaching lifting arms and adjusting their locking mechanisms.

Q. Electrical System Wiring

Connecting the power source and motor wiring to the AC contactor.

Exploded Views

Main Lift Component Diagram

Diagram illustrating major lift components with part numbers.

Hydraulic Cylinder and SPX Power Unit Parts

Exploded views and parts breakdown for cylinders and SPX power unit.

Atlas Power Unit Parts Diagram

Exploded view and parts breakdown for the Atlas hydraulic power unit.

Hydraulic Valve Illustrations

Diagrams showing hydraulic valve components for SPX and Atlas power units.

Test Run Procedures

Synchronizing Cable and Safety Cable Adjustment

Adjusting cables for synchronized movement and safety lock function.

Air Bleeding and Lowering Speed Adjustment

Removing air from the hydraulic system and adjusting lowering speed.

Load Testing and Vibration Checks

Performing a test run with a load to verify functionality and identify issues.

Operation Instructions

Vehicle Lifting Procedure

Step-by-step guide for safely lifting a vehicle onto the lift.

Vehicle Lowering Procedure

Step-by-step guide for safely lowering a vehicle from the lift.

Maintenance Schedule

Monthly Maintenance Tasks

Routine monthly checks and lubrication tasks for the lift.

Semi-Annual Maintenance Tasks

Periodic checks and adjustments required every six months.

Troubleshooting Guide

Motor and Operation Faults

Diagnosing and resolving problems related to motor operation and lift movement.

Lift Stability and Lowering Issues

Addressing issues where the lift fails to stay up, raises slowly, or won't lower.

Parts List

Main Lift Components Parts

A comprehensive list of parts for the main lift components.

Lifting Arms, Locks, and Control Parts

Parts breakdown for lifting arms, locks, and control bar components.

Pad, Cushion, and Fastener Parts

List of parts for rubber pads, cushions, and associated fasteners.

Safety, Pulley, and Hose Fitting Parts

Parts for safety locks, pulleys, oil hoses, and cable fittings.

Hydraulic Cylinder Parts List

Detailed list of parts for the hydraulic cylinders.

SPX Power Unit Parts Breakdown

Comprehensive parts list for the SPX hydraulic power unit.

Atlas Power Unit Parts Breakdown

Comprehensive parts list for the Atlas hydraulic power unit.

Warranty Information

Limited Warranty Coverage and Exclusions

Details of the limited warranty coverage, exclusions, and terms.

Warranty Claims and Product Returns

Procedures for submitting warranty claims and returning products.