Need help?Do you have a question about the Atlas Weather-Ometer Ci4000 and is the answer not in the manual?
General| Model | Ci4000 |
|---|---|
| Type | Weather-Ometer |
| Light Source | Xenon Arc Lamp |
| Irradiance Control | Yes |
| Temperature Range | Ambient to 100°C |
| Humidity Range | Up to 95% RH |
| Temperature Control | Yes |
| Humidity Control | Yes |
| Spray | Yes |
| Water Spray System | Programmable |
| Power Requirements | 220-240V, 50/60Hz |
| Control System | Touchscreen |
Detailed steps for diagnosing and resolving power-up issues in the instrument, covering potential causes and solutions.
Covers malfunctions related to the xenon lamp system, including ignition, irradiance output, and wattage control issues.
Troubleshooting procedures for issues related to the humidification system, including control and sensing errors.
Guides for identifying and resolving chamber overtemperature issues, including safety thermostat and alarm checks.
Troubleshooting steps for malfunctions within the CS-6 lamp cooling system, focusing on water flow and temperature.
Procedures for diagnosing and fixing problems with the instrument's blower system, including motor and controller issues.
Detailed instructions for replacing various sensors within the instrument, including light monitor and temperature sensors.
Details on identifying, handling, and installing light monitor photodiodes and interference filters for accurate readings.
Procedure for accessing and replacing the chamber overtemperature thermostat, ensuring proper thermal contact and sealing.
Instructions for replacing the RTD temperature sensor for chamber overtemperature alarms on specific older Ci4000 models.
To Next Page
