Atlona AT-HDVS-210H-TX-WP User Manual

Atlona Manuals
Switchers
AT-HDVS-210H-TX-WP
Two-Input Wallplate Switcher for HDMI
with Ethernet-Enabled HDBaseT
™
Output
4K / UHD

Atlona AT-HDVS-210H-TX-WP Specifications

General

Brand	Atlona
Model	AT-HDVS-210H-TX-WP
Category	Switch
Language	English

Summary

Atlona, Inc. Limited Product Warranty

Coverage

Coverage Periods

Limited Product Warranty Terms – New Products

Specifies warranty terms for hardware/electronics products purchased on or after June 1, 2013.

Remedy

Explains how end-purchasers can obtain warranty service and required procedures.

Exclusions

Important Safety Information

Features

Panel Description

Installation

Connection Instructions

Guidance on connecting Ethernet cables, HDMI sources, and RS-232 control.

Connection Diagram

Visual representations of system connection layouts for different scenarios.

IP Configuration

Procedures for setting the unit's IP mode (DHCP or Static) and IP address.

Resetting to Factory-Default Settings

The Web GUI

Accessing the Web GUI

Methods for accessing the unit's web-based graphical user interface for management.

A/V Settings page

Configuration options for audio and video inputs, auto-switching, and HDCP.

Display page

RS-232 page

EDID page

Settings for managing EDID (Extended Display Identification Data) for inputs.

Config page

System page

HDBT page

Commands

Appendix

Internal EDID Data

Updating the Firmware

Instructions for updating the unit's firmware using the web GUI or USB.

Default Settings

Specifications