Need help?Do you have a question about the Atlona AT-UHD-CLSO-824 and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | AT-UHD-CLSO-824 |
| Input Ports | 8 |
| Output Ports | 4 |
| HDMI Inputs | 8 |
| HDMI Outputs | 2 |
| HDBaseT Outputs | 2 |
| Video Resolution | Up to 4K@60Hz (4:4:4) |
| 4K/UHD Support | Yes |
| HDMI Version | 2.0 |
| HDCP Support | 2.2 |
| Audio De-embedding | Yes |
| PoE | Yes |
| Audio Support | Dolby Digital, DTS |
| Control Interface | RS-232, Ethernet |
| Control | RS-232, Ethernet, IR |
| Form Factor | Rack-mountable |
| Power Supply | 100-240V AC |
Details the buttons, display, and LEDs on the front of the unit.
Explains the various input and output ports on the rear of the device.
Connecting the switcher to a network using DHCP or static IP.
How to access the WebGUI and log in to the switcher.
Configuring IP address, subnet, gateway, and telnet port.
Selecting EDID for HDMI/HDBaseT inputs and VGA timing.
Configuring HDCP reporting for inputs and outputs.
Instructions for downloading and installing firmware updates.
How to connect and configure the RS-232 serial port for control.
Lists commands for power, routing, and status.
Commands for network configuration, user management, and IP login.
Details video resolutions, color space, audio formats, and bit rates.
Specifies cable lengths for various resolutions and signal bandwidth.
Important safeguards to reduce the risk of electric shock and damage.
To Next Page
