Need help?Do you have a question about the Atlona AT-UHD-PRO3-88M and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | AT-UHD-PRO3-88M |
| Input Ports | 8 |
| Output Ports | 8 |
| HDMI Version | 2.0 |
| HDCP Version | 2.2 |
| EDID Management | Yes |
| Power Supply | 100-240V AC, 50/60Hz |
| Humidity | 10% to 90% (non-condensing) |
| Rack Units | 1U |
| Video Resolution Support | Up to 4K@60Hz (4:4:4) |
| HDR Support | HDR10 |
| Audio Formats | Dolby Digital, DTS, DTS-HD Master Audio |
| Control | RS-232 |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Weight | 8.5 lbs |
Details on Atlona's product warranty coverage, including repair or replacement options.
Outlines the process for obtaining warranty service and returning defective products.
Provides essential safety guidelines for operating the product.
Details critical warnings related to electrical hazards, environment, and usage.
Highlights the key features and capabilities of the AT-UHD-PRO3-88M matrix switcher.
Details the front panel display and control buttons.
Details the rear panel ports, connectors, and power switch.
Step-by-step guide for connecting sources, displays, and control systems.
Step-by-step guide to setting the IP mode (DHCP or Static) using the front panel controls.
Instructions for configuring the IP mode (DHCP or Static) through the web GUI.
Procedure for powering the matrix on and off using the rear panel switch.
How to put the matrix into standby mode and resume normal operation.
Step-by-step guide to routing inputs to outputs using the front panel controls.
Instructions for routing inputs to outputs using the web GUI interface.
Procedure to route a single input to all outputs using the front panel.
Instructions to route a single input to all outputs via the web GUI.
Explains the concept and function of output mirroring.
Step-by-step guide to configuring output mirroring through the web GUI.
Covers creating, editing, and using routing presets for quick configuration switching.
Step-by-step guide to creating a new routing preset via the web GUI.
Tools for assigning descriptive names to inputs and outputs.
Procedure for renaming input labels using the web GUI.
Procedure for renaming output labels using the web GUI.
Covers managing Extended Display Identification Data (EDID) for compatibility.
How to capture and store EDID data from a connected display using the front panel.
Configuration of input/output routing and labeling.
To Next Page
