EasyManua.ls Logo

Atom 435 - Page 18

Atom 435
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engine Oil (4-Stroke) Check level
Change
Check
Clean & oil sponge filter element
Engine cooling fins Check
Nuts, bolts, fasteners Check
(Retighten if necessary) Visual inspection
Carburettor nuts, bolts, fixtures
(Retighten if necessary)
Engine idle speed check adjust
Carburettor gaskets or “O” rings. Renew as
required if hard starting or lack of idle control
Combustion chamber, muffler Clean After every 300 hrs (2)
Check-adjust
Replace
Throttle cable Check
Throttle lever Check
Valve clearance (4-Stroke) Check-adjust
Fuel tank Clean
Fuel filter Check and/or replace
Fuel tubes and grommit Check Every 2 years (Replace if necessary) (2)
Oil tube (4-Stroke) Check Every 2 years (Replace if necessary) (2)
Spark Arrestor
Tiller gear box Add grease
Engine drill gear box Add grease
REGULAR SERVICE PERIOD
Perform at every indicated month or operating hour interval, whichever comes first.
ITEM
Every
month
or
25 hrs
Each
Use
Every
year
or 50 hrs
Every 2
years
or
300 hrs
Refer
to
page
9
9
19
19
19
19
19
19
19
19
17
17
(2)
Renew
when
unservi-
ceable
(1)
Special
Notes
Air
cleaner
Spark
plug
Regular service will
considerably extend
engine life
See Page 19
Only when required
MAINTENANCE: ENGINES & GEAR BOXES
NOTE: (1) Service more frequently (eg every 5 hours) when used in dusty areas. Replace if damaged or unserviceable.
(2)
These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient.
(3) Log hours of operation to determine proper maintenance intervals.
(4) Some parts of the power tool are subject to normal wear and tear even during regular operation in accordance with
instructions, and depending on the type and duration of use have to be replaced in good time. Among these parts are air
filters, fuel filters, fuel lines and grommets, rewind starter parts, manifold o-ring (Honda). These are not covered by warranty.
IMPORTANT If storing unit for three months or more drain fuel from tank, restart motor to use fuel in carburettor.
STORAGE: Store in a safe and dry place.
PAGE 18
(2)(2)

Related product manuals