4.2 Using the chopper jar 4.3 Locking and unlocking the chopper jar lid
Note:
1. The chopper jar runs at an optimised speed of 2000 RPM regardless of the speed/pulse selected.
2. The entire LED strip will glow when using the chopper jar.
1. Place the lid on the jar and rotate anti-clockwise as shown in the picture.
2. Ensure that the lid is securely locked.
3. To unlock, turn the lid clockwise and lift. (refer to the lock/unlock symbols
marked on the lid of the jar)
1. Prepare the ingredients required for chopping: if the pieces are too big,
chop them up into smaller pieces.
2. Fix the blade with shaft in the chopper jar as shown in the picture.
3. Add the ingredients to the jar according to the recommended quantity.
4. Securely lock the jar lid as per the instructions given in sec 4.3
5. Fix the chopper jar in base unit and rotate clockwise to lock.
(refer to sec 5 for more details on LED indication).
6. Recommended speed for chopping is pulse.
7. Remove the lid by turning it in the anticlockwise direction to add ingredients
or stir using a stirrer as required.
8. Close the lids and resume chopping as required.
CAUTION:
The chopper blade is very sharp. Handle with utmost care while handling and cleaning.
How to assemble the blade:
Place the top blade in the blade shaft.
Align it with the grooves and rotate it in anti-clockwise direction to lock it.
Twist the top blade in clockwise direction to remove it for cleaning.
To Next Page
Loading...