Atomic Beam COP CAM - User Manual

To Next Page

SEE INSTRUCTION MANUAL FOR FULL INSTUCTIONS

AND IMPORTANT SAFETY INFORMATION.

A. Power/Record Button

B. Indicator Light

C. Camera Lens

D. Night Mode Bulbs

E. Memory Card Port

F. Charging Port

PRODUCT COMPONENTS

POWER ON/OFF

To Power On:

To turn on press and hold

POWER/RECORD button for

4 seconds.

To Power Off:

To turn off press and hold

POWER/RECORD button for

4 seconds.

QUICK START GUIDE

Need help?

Do you have a question about the Atomic Beam COP CAM and is the answer not in the manual?

Summary

Identifies the main physical parts of the COP CAM, including buttons, lens, indicator lights, and ports.

Instructions for turning the COP CAM on and off by holding the Power/Record button for 4 seconds.

Step 1 explains powering on the device and its automatic video recording upon motion detection.

Step 2 details switching to photo mode and taking pictures with a quick button press.

Step 3 describes extracting recorded video and photos via the memory card or USB connection.

Step 4 outlines the process of charging the COP CAM using a computer or laptop connection.

General