5. After confirmation, follow the procedure below after the watch resumes running:
a. Set your watch to the correct Time Zone.
b. Set your Local Time manually (go to Manual Time Setting for details). You
don’t need to set the exact minute and second but make sure HOUR and AM/PM
are correct. You watch will synchronize to the Atomic clock after it receives the
signal (the reason to set time is to make sure your watch will initiate signal
reception at around 3AM local time.)
c. Put the watch in a location where reception is possible. The watch will
automatically initiate a reception at 3AM. After receiving a valid time signal, the
hands will move on the correct time.
If you require any technical assistance, please contact:
Independent Living Aids
Phone: (800) 537-2118
E-Mail:
techsupport@independentliving.com
To Previous Page
Loading...