Atomos Connect-AC Series - Unit Description

CONNECT-AC
1. LED DISPLAY
2. SELECT
3. MODE
4. USB port
(firmware updates only)
5. HDMI port
(H2S in / S2H out)
6. SDI CONNECTOR
(H2S out / S2H out)
7. SDI CONNECTOR
(H2S out / S2H in)
8. AC input
9. SCREW HOLES FOR
RACK MOUNTING
(both sides)
LED INDICATOR OVERVIEW
There are 3 modes of operation indicated
by LEDs.
MODE LED COLOUR
CONVERTER MODE
TPG MODE
FLASHLIGHT MODE
LED LABELS
PDR Pulldown Removal
TPG Test Pattern Generator
Rx Conversion Input Status
TPG> (TEST PATTERN MODE)
M Mode
P/I Progressive/Interlaced
R Rate
S Scan
Unit description
Atomos Connect-AC User Manual V1.0 3
1
2
7
5
6
3
8
9
9
9
9
4
FRONT
BACK
LEFT
RIGHT