Atomos Samurai. User Manual V1.01 5
2. What you also need cont.
SDI cables (not included)
SDI cables are robust physically and electrically: you should rarely have
problems with signal transmission unless your cables are either damaged
or too long. Please remember that SDI cables use locking connectors
and will not simply pull out if they are jerked or tripped over. They are
therefore a significant trip hazard, and also a hazard to your equipment,
which may be damaged if the cables are mishandled.
If the SDI cable is removed while recording the “Skippy”
image will also be displayed. To remove touch skippy and he
will disappear ready for his next notification.
Refer to Part 8: Atomos Anti-skip Technology for more
information about “Skippy”.
Note that Mini-BNC > BNC cable adaptors are provided.
Please note the Mini-BNC cables provided are for use with a normal
male>male connector, and a normal SDI cable female>female is required
for operation with the camera.
If you should lose them, they are available from your Atomos dealer. The
Atomos cable adaptors provided are extremely tough. They are also more
flexible than “traditional” SDI cables, which means that your camera and
Samurai are less likely to suffer stresses caused by stiff or inflexible cables.
Standard 1/4” Camcorder Mount
This must fit a standard 1/4” screw mount. Select the type
that best suits your application and conditions.
To Next Page
Loading...
Need help?
General
