At the bottom, there's the "Forget this Network" button that disconnects you from this
network immediately and also disengages the Auto Join functionality.
To turn off WiFi, press the switch on the left to disable it.
Ethernet:
Before establishing a network connection via Ethernet, ensure that"WiFi is disabled. Next,
connect the included USB-C to Ethernet dongle to the port labeled USB2 in the back of the
ZATO CONNECT.
After that, navigate to the Ethernet tab within the Network menu and press the ON/OFF
switch to put it from the OFF into the ON position.
To Next Page
Loading...
Need help?
General
