Before using the laser marking machine, please read this safety guide carefully, it mentions situations that require special
attention and includes warnings of unsafe practices that can cause damage to your property or even endanger your personal
safety.
1. The product belongs to Class 4 laser products, the laser system itself must meet the requirements of IEC 60825-1 latest version,
otherwise the product is prohibited to be used.
2. When handling the product,you must wear appropriate goggles(OD5+) to protect eyes from laser light including reflected and stray
light.
3.Because cutting burns off the substrate, a high-intensity laser beam generates extremely high temperatures and a lot of heat. Certain
materials can catch fire during cutting, creating gases and fumes inside the equipment. A small flame usually appears here when a laser
beam hits the material. It will move with the laser and will not stay lit when the laser passes by. Do not leave the machine unattended
during the marking process. After use, be sure to clean up the debris, debris and flammable materials in the marking machine. Always
keep an available fire extinguisher nearby to ensure safety. When laser marking machines are used, smoke, vapour, particles, and
potentially highly toxic materials (plastics and other combustible materials) are produced from the material. These fumes or air pollutants
can be hazardous to health.
4.To prevent accidental disasters such as fire and electric shock, the marking machine provides a power adapter with a ground wire.
When using the marking machine, insert the power plug into a power socket with a ground wire with a ground wire .
5.When the marking machine is working, please make sure that the workplace must be cleaned up, and there should be no flammable
and explosive materials around the equipment.
Part 1: Security Statement Before Installation
To Next Page
Loading...
Need help?
General
