Atop AT400 User Manual (English)

To Next Page

ABLEPick Pick-to-light

Communication Protocol

User Manual

V 2.4

Updated at: 2012/04/25

ATOP Technologies, Inc.

Tel: +886-3-5508137

Fax: +886-3-5508131

E-mail: TTTTabelin@atop.com.tw

Table of Contents2
Contents2
Introduction5
Pick-To-Light Operation9
Work Flow of Pick-To-Light System: below Simply Describe the Basic Operation9
Data Entry9
Control and Communication9
Light up9
Pick and Confirm9
Complete9
Ablepick Hardware Introduction9
Tcp/Ip Controller9
AT500-Standard TCP/IP Controller9
AT400-Compact TCP/IP Controller10
Picking Tag11
5-Digit Picking Tag (AT505 & AT705)11
3-Digit Picking Tag (AT703)12
2-Digit Picking Tag (AT502 & AT702)12
3-Digit Directional Picking Tag(AT503A)12
4-Digit Directional Picking Tag(AT504A )13
2-Digit Vertical Directional Picking Tag(AT502V )13
6-Digit, 2 Separated Windows Picking Tag(AT506-2W-33)14
6-Digit, 3 Separated Windows Picking Tag(AT506-3W-123 )14
12-Digit Alphanumerical Display(AT50C & AT70C)15
10-Digit, 3 Separated Windows Alphanumerical Picking Tag(AT50A-3W-523)15
3-Digit, 4 Lightable Buttons Picking Tag(AT503-4K)16
Economic Picking Tag(AT50N & AT70N)18
6-Digit Order Display(AT506 & AT706)18
Bay Indicator(AT511)18
Completion Indicator(AT510)18
Melody Completion Indicator(AT510M & AT710M)19
RS232 Converter(AT530/AT530L & AT730)20
6-Digit, 2-Color Display Pick Tag(AT706-24-3K)20
Ablepick Tcp/Ip Communication Protocol21
Communication Control Block (Ccb) Format21
Sub-Command List21
Send Command to Tags (PCTCP/IP Controller)22
Showing Alphanumerical Characters on 7-Segment LED Display23
Turn off 7-Segment LED Dispisplay or Clear All Message Buffers23
Turn LED Indicator on24
Turn LED Indicator off24
Turn Buzzer on24
Turn Buzzer off25
Flashing the Display on 7-Segment LED Display25
Flashing the LED Indicator25
Configure the Flashing Time Interval26
Showing Tag's Node Address on Display26
Disable the Shortage/Down-Count Button26
Enable the Shortage/Down-Count Button27
Emulating Push Confirmation Button27
Emulating Push Shortage/Down-Count Button27
Switching to Stock Mode27
Switching to Picking Mode28
Disable the Confirmation Button28
Enable Confirmation Button28
Set Available Number of Digits for Up/Down Counting28
Set Tag's Specific Configuration29
Get Device's F/W Model Information35
Get Device's Detail Configured Information35
Configure the TCP/IP Controller's Polling Range36
Getting All the Device's Status under One TCP/IP Controller36
Asking Device to Reset36
Configure the Device's Node Address37
Receive Message from Tags (PCTCP/IP Controller)37
Returning Confirmation Message from Push-Button37
Returning Shortage Message from Push-Button38
Returning Device Timeout38
Returning a Device Malfunction39
Returning an Illegal Command39
Returning Push-Button Locked Message39
Returning a Device Resetting OK39
Returning Quantity under Stock Mode40
Returning All Devices' Communication Status40
Special Return Code41
Return Device's F/W Model String42
Return Device's Detail Information42
Specific Protocol for some Light Models43
Protocol for AT50C/AT70C43
Protocol for AT504/AT503A/AT502V46
Protocol for AT506-3W-12347
Protocol for AT530/AT73048
Protocol for AT510M/AT710M49
Protocol for AT503-4K50
Protocol for AT52058
Advanced Way to Configure Device's Node Address62
At400 Compact Tcp/Ip Controller's Alarm Status Control64
Read Alarm Status64
Return Alarm Status from AT40064
Enable/Disable the Alarm Auto-Report Function65
Enable/Disable the Alarm Auto-Buzzer Function66

Need help?

Do you have a question about the Atop AT400 and is the answer not in the manual?

Atop AT400 Specifications

General

Brand	Atop
Model	AT400
Category	Conference System
Language	English

Related product manuals

Atop AT400 User Manual

Table of Contents

Atop AT400 Specifications

Related product manuals