Atop ABLEPick AT500 User Manual (English)

To Next Page

ABLEPick Pick-to-light

Communication Protocol

User Manual

V 2.4

Updated at: 2012/04/25

ATOP Technologies, Inc.

Tel: +886-3-5508137

Fax: +886-3-5508131

E-mail: TTTTabelin@atop.com.tw

Table of Contents2
Contents2
Introduction5
Pick-To-Light Operation9
Work Flow of Pick-To-Light System: below Simply Describe the Basic Operation9
Data Entry9
Control and Communication9
Light up9
Pick and Confirm9
Complete9
Ablepick Hardware Introduction9
Tcp/Ip Controller9
AT500-Standard TCP/IP Controller9
AT400-Compact TCP/IP Controller10
Picking Tag11
5-Digit Picking Tag (AT505 & AT705)11
3-Digit Picking Tag (AT703)12
2-Digit Picking Tag (AT502 & AT702)12
3-Digit Directional Picking Tag(AT503A)12
4-Digit Directional Picking Tag(AT504A )13
2-Digit Vertical Directional Picking Tag(AT502V )13
6-Digit, 2 Separated Windows Picking Tag(AT506-2W-33)14
6-Digit, 3 Separated Windows Picking Tag(AT506-3W-123 )14
12-Digit Alphanumerical Display(AT50C & AT70C)15
10-Digit, 3 Separated Windows Alphanumerical Picking Tag(AT50A-3W-523)15
3-Digit, 4 Lightable Buttons Picking Tag(AT503-4K)16
Economic Picking Tag(AT50N & AT70N)18
6-Digit Order Display(AT506 & AT706)18
Bay Indicator(AT511)18
Completion Indicator(AT510)18
Melody Completion Indicator(AT510M & AT710M)19
RS232 Converter(AT530/AT530L & AT730)20
6-Digit, 2-Color Display Pick Tag(AT706-24-3K)20
Ablepick Tcp/Ip Communication Protocol21
Communication Control Block (Ccb) Format21
Sub-Command List21
Send Command to Tags (PCTCP/IP Controller)22
Showing Alphanumerical Characters on 7-Segment LED Display23
Turn off 7-Segment LED Dispisplay or Clear All Message Buffers23
Turn LED Indicator on24
Turn LED Indicator off24
Turn Buzzer on24
Turn Buzzer off25
Flashing the Display on 7-Segment LED Display25
Flashing the LED Indicator25
Configure the Flashing Time Interval26
Showing Tag's Node Address on Display26
Disable the Shortage/Down-Count Button26
Enable the Shortage/Down-Count Button27
Emulating Push Confirmation Button27
Emulating Push Shortage/Down-Count Button27
Switching to Stock Mode27
Switching to Picking Mode28
Disable the Confirmation Button28
Enable Confirmation Button28
Set Available Number of Digits for Up/Down Counting28
Set Tag's Specific Configuration29
Get Device's F/W Model Information35
Get Device's Detail Configured Information35
Configure the TCP/IP Controller's Polling Range36
Getting All the Device's Status under One TCP/IP Controller36
Asking Device to Reset36
Configure the Device's Node Address37
Receive Message from Tags (PCTCP/IP Controller)37
Returning Confirmation Message from Push-Button37
Returning Shortage Message from Push-Button38
Returning Device Timeout38
Returning a Device Malfunction39
Returning an Illegal Command39
Returning Push-Button Locked Message39
Returning a Device Resetting OK39
Returning Quantity under Stock Mode40
Returning All Devices' Communication Status40
Special Return Code41
Return Device's F/W Model String42
Return Device's Detail Information42
Specific Protocol for some Light Models43
Protocol for AT50C/AT70C43
Protocol for AT504/AT503A/AT502V46
Protocol for AT506-3W-12347
Protocol for AT530/AT73048
Protocol for AT510M/AT710M49
Protocol for AT503-4K50
Protocol for AT52058
Advanced Way to Configure Device's Node Address62
At400 Compact Tcp/Ip Controller's Alarm Status Control64
Read Alarm Status64
Return Alarm Status from AT40064
Enable/Disable the Alarm Auto-Report Function65
Enable/Disable the Alarm Auto-Buzzer Function66

Need help?

Do you have a question about the Atop ABLEPick AT500 and is the answer not in the manual?

Atop ABLEPick AT500 Specifications

General

Sensitivity	-38dB ± 3dB
Charging Time	2-3 hours
Color	Black
Connection Type	USB
Impedance	2.2kΩ
Connectivity	USB
Power	Rechargeable battery
Current Consumption	≤100mA

Related product manuals

Atop ABLEPick AT500 User Manual

Table of Contents

Atop ABLEPick AT500 Specifications

Related product manuals