(12)Strauss
3.2.17 RS232 converter(AT530/AT530L & AT730)
AT530./AT730 is used to convert message from RS232 interface into ATOP’s proprietary
protocol, such as Barcode scanner with RS232 interface….etc. The only one red light is
used to be the indicator of receiving message status. When message is sent into the
device from RS232, the led will be on and when this message is gotten back by the
controller, then the led will be off.
3.2.17 6-digit, 2-color display pick tag(AT706-24-3K)
AT706-24-3K has 6-digit 7-segment LED display with 2 colors, the first 2 digits are GREEN,
the last 4 digits are RED color. Besides the two up and down functions, AT706-24-3K has
another blue function key, which can return message any time when it has been push
down. AT706-24-3K has the fully compatible function as the other pick tags, like AT705,
AT703.
AT706-24-3K has 10 messages buffers. It means software can send 10 messages into
AT706-24-3K in advance, first message will be shown on LED, the others will be pop out to
show sequentially by pushing the confirmation buttons.
ATOP also has another similar model called AT706-3K, whose 6 digits 7-segment LED are
all RED color, and have one display buffer.
To Next Page
Loading...