Atop ABLEPick AT500 - 4.3.6 Turn Buzzer OFF; 4.3.7 Flashing the display on 7-segment LED display; 4.3.8 Flashing the LED indicator

ABLEPick pick-to-light communication protocol
24
buzzer.
4.3.6 Turn Buzzer OFF
SUB-COMMAND = 05H
CCB LEN (L) = 08H
Data length of this block
CCB LEN (H) = 00H
MESSAGE TYPE = 60H
60H : port 1
Reserved
Reserved
Reserved
SUB-COMMAND = 05H
SUB-NODE = {01H ~ FAH}
0x01~0xFA (address)
or 0xFC (Broadcasting)
Turn off the buzzer of AT510 and Melody of AT510M/AT710M, not for AT50C/AT70C’s
buzzer.
4.3.7 Flashing the display on 7-segment LED display
SUB-COMMAND = 10H
This sub-command can force the 7-segment LED display to be blinking. And its flashing
time interval is according to the flash time interval setup of sub-command = 12H.
CCB LEN(L)= 0FH
Length of CCB = 15 bytes
CCB LEN(H) =00H
MESSAGE TYPE = 60H
60H: port1 of controller,
Reserved
Reserved
Reserved
SUB-COMMAND = 10H
SUB-NODE
0x01~0xFA (address)
or 0xFC (Broadcasting)
Data 0
6
th
digit in LED
Data 1
5
th
digit in LED
Data 2
4
th
digit in LED
Data 3
3
rd
digit in LED
Data 4
2
nd
digit in LED
Data 5
1
st
digit in LED
Data 6
Dot position
DATA[0~5] = The alphanumerical characters will display on the 7-segment LED display
DATA[0] = 6th digit
DATA[1] = 5th digit
:
DATA[5] = 1st digit
DATA[6] = decimal points
4.3.8 Flashing the LED indicator
SUB-COMMAND = 11H
CCB LEN (L) = 08H
Data length of this block
CCB LEN (H) = 00H