EasyManua.ls Logo

Atrie DB108 - 4 OTHER CONFIGURATION; 4.1 LAN CONFIGURATION; 4.1.1 CONFIGURATION OF MODEMS IP ADDRESS; 4.1.2 DHCP CONFIGURATION

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Atrie DB108Ethernet User Manual
Page 13 Total 17 Pages
4 OTHER CONFIGURATION
4.1 LAN CONFIGURATION
Configuration of Modem’s IP address and password
4.1.1 CONFIGURATION OF MODEM’S IP ADDRESS
As a network device, ADSL Modem has its own IP address and MAC address. The factory sets the
MODEM, at a default IP address of 192.168.1.1 and subnet mask of 255.255.255.0. The user can configure
these addresses through the “LAN” on “Configuration” like this:
For example, change IP address to “10.10.10.10”. Click ”LAN”, input “IP address”: 10.10.10.10, then
“subnet mask”: 255.0.0.0, the result is as Figure4.1, press “save”.
Figure 4.1
Note
If you change IP address, it will take effect immediately. You must use the new IP address to login.
4.1.2 DHCP CONFIGURATION
clickLAN
clickDHCP server

Related product manuals