To Next PageTo Next PageHow to increase low analog audio input volume on ATV Switch?
If you're experiencing low analog audio input volume, ensure the Input Impedance is set to Hi-Z and adjust the Input Gain, especially when connecting to a consumer product.
Why is the analog audio output volume low on my ATV MS-8?
The ATV Switch MS-8 has an output load impedance of 20 kΩ or greater. If you have connected to a device with a low input impedance, adjust the impedance as necessary by connecting via a direct box or other device.
What causes distorted analog audio input on ATV MS-8 Switch even after adjusting gain?
If the analog audio input is distorted even after adjusting the input gain, the Input Impedance setting might be incorrect. For certain types of professional equipment, it is necessary to specify the input impedance as 600 ohms.
How to decrease high analog audio output volume on ATV MS-8 Switch?
Adjust the Maximum Output Level.
Why is there no sound from HDMI IN or SDI IN connectors on my ATV Switch?
The ATV Switch MS-8 does not support Dolby or other non-PCM data. Ensure the audio data input from the SDI or HDMI connectors is in linear PCM format. Also, verify that the SDI or HDMI input audio channel settings are correct, as the device allows selection of any two from 16 SDI and eight HDMI channels.
What to do if no SDI output video is displayed on ATV MS-8 Switch?
First, ensure the connected SDI device is compliant with 3G-SDI. If using an HD-SDI-compliant device, set the System Format to either 1080i or 720p. Next, verify the 3G-SDI Out Type settings are correctly specified to match the connected device. Finally, confirm the SDI Color is set to YCC4:2:2, as few devices are compliant with RGB4:4:4 or YCC4:4:4.
How to fix no HDMI input on ATV MS-8?
The ATV Switch MS-8 might not be accepting the HDMI input because it is copyright protected, as the device is not compliant with HDCP. Also, check the specifications to ensure the input format is compliant with the MS-8.
What to do if the reference signal does not lock on ATV MS-8 Switch?
Ensure that the input reference signal has a frame rate identical to that of the output format of the ATV Switch device.
How to resolve hidden HDMI output on ATV Switch?
Match the output format settings to changes in the output format.
General