EasyManuals Logo

AUDAC CELO6 User Manual

AUDAC CELO6
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
CAUTION
USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER
USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND
MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.
ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.
EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,
THINNER OR OTHER COMBUSTIBLES
AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING
THE LOUDSPEAKER
DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT
DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing
to qualified service personnel. Do not perform any servicing
(unless you are qualified to do so.)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and
further relevant specifications described in following directives:
2004/108/EC (EMC) and 2006/95/EC (LVD)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be
disposed with regular houshold waste at the end of its product
life. This regulation is created to protect both the environment
and human health.
This product is developed and manufactured with high quality
materials and components which can be recycled and/or reused.
Please dispose this product to your local collection point or
recycling centre for electrical and electronic waste. This will
make to sure that it will be recycled on an environmentally friendly
manner, and will help to protect the environment in which we all
live.

Other manuals for AUDAC CELO6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AUDAC CELO6 and is the answer not in the manual?

AUDAC CELO6 Specifications

Power and Sound IconPower and Sound
RMS power60 Watt
max power120 Watt
nominal impedance8 Ohm
sensitivity88 dB
sound pressure106 dB
frequency response55 Hz - 20 kHz
cross-over frequency3.0 kHz
Weight and Dimensions IconWeight and Dimensions
dimensionsØ 230 x 103 mm
cut-out measurementØ 210 mm
built-in depth100 mm
weight1, 5 Kg
shipping weight2, 1 Kg