AUDAC IMEO2/B Quick Start Guide

IMEO2 - Quick Start Guide02
Rear
5) AC Power inlet connection:
The mains power supply (100-240V AC - 50/60
Hz) has to be applied to this AC power inlet. The
connection is made by an IEC C8 power connector
and the power lead is standard tted, but can be
unplugged for convenient assembly.
6) Coaxial input connection:
The coaxial input connection (RCA) allows connecting
the sound bar to any TV, receiver or other source
device with an coaxial SP/DIF output connection.
7) Optical input connection:
The optical input connection (Toslink) allows
connecting the sound bar to any TV, receiver or
other source device with an optical SP/DIF output
connection.
8) USB socket:
The USB connection allows connection to memory
devices. This allows previously stored audio sources
to be played back (MP3, FLAC, WAV).
9) AUX socket:
The AUX input connection (3.5 mm jack) allows
connecting the sound bar to any stereo line-level
audio source. It can be a connection between a
portable device such as smartphone, tablet, laptop
or headphone output of any device.
10) HDMI ARC socket:
The HDMI input socket allows connecting the
soundbar to any TV or projector with an HDMI
connection supporting ARC functionality
Using Bluetooth
The rst time when your Bluetooth portable device is connected (smartphone, tablet, ...) it needs to get
paired. For getting it paired, the sound bar shall be switched ON and in Bluetooth mode. This can be
done using the power button on the side of the unit, or the remote control. When in Bluetooth mode,
the blue LED behind the front grill will blink. Activate the Bluetooth mode in your portable device and
search for devices.
The device name ‘AUDAC IMEO2’ will appear on your Bluetooth device list. If the device can’t be found,
press and hold the button on the remote control to be discoverable. The system will enter
in pairing mode and two ‘beeps’ will be heard through the speakers. The Bluetooth indicator (blue LED)
will blink fast. Select ‘AUDAC IMEO2’ from the device list and an ‘uplifting beep’ will be heard through the
speakers. The Bluetooth indicator (blue LED) will illuminate constantly.
/ / PPAIRAIR
5 6 7 8 9 10
COAXIAL OPTICAL USB
AUX
HDMI / ARC

AUDAC IMEO2/B Specifications

General

Brand	AUDAC
Model	IMEO2/B
Category	Speaker System
Language	English