AUDAC LX523 User Manual

PROFESSIONAL AUDIO EQUIPMENT
Active Speaker System with remote input LX523
User Manual &
Installation Guide
Active Speaker
Syste
m
LX523
AUDAC

AUDAC LX523 Specifications

General

Brand	AUDAC
Model	LX523
Category	Speaker System
Language	English

Summary

Introduction

Safety Requirements

Overview Rear Panel of the LX523

Speaker Output

Connects the supplied passive loudspeaker. Ensure correct polarity.

On/Off Switch

Main unit power switch. Green power LED indicates status when on.

Power Supply Socket

IEC socket for mains connection. Contains a 1A slow blow fuse. Avoid ground loops.

Heatsink

Dissipates heat generated during operation. Ensure adequate airflow behind the speaker.

Volume Control

Adjusts the general volume for the speaker system.

Treble Control

Adjusts high frequencies to improve intelligibility. Centre position is neutral.

Bass Control

Adds warmth or improves intelligibility of speech by adjusting bass.

RJ45 Remote Input

Connects remote input units (WP523/RM523) via CAT5 cabling.

Remote Input Connection Specifications

Pin Assignments

Specifies pin-out for RJ45 connector for proper system functioning.

Cabling Straightness Attention

Twisted pair cabling must be 'straight' for proper system operation.

Connecting the LX523 to WP523

Connecting the LX523 to RM523

Connecting Multiple LX523 Sets to One Input Unit

Power Distribution Attention

Ensure power is distributed from only one loudspeaker set to avoid malfunctions.

Features and Specifications