AUDAC LX523 User Manual

6
Remote input connection specifications
The connections between the LX523 speaker system and the used input unit (WP523 or RM523)
should be always made by means of twisted pair cabling. The maximum cable distance between the
input unit and the speaker system depends of the used cable. For standard CAT5 cable, the
maximum cable distance between the input unit and the speaker system can reach up to 500 meter.
When better CAT6 or CAT7 cable is used, the maximum cable distance can reach even longer
distances.
To ensure a proper working of the system, all 8 conductors of the twisted pair cable have to be
connected according to the table below.
ATTENTION
The twisted pair cabling must always be ‘straight’. In case of
self made cabling, it must be wired ad described above, to
make the system work properly.
Pin 1 White-Orange Audio Left
Pin 2 Orange Audio Left
Pin 3 White-Green +12V DC
Pin 4 Blue -12 V DC
Pin 5 White-Blue GND
Pin 6 Green GND
Pin 7 White-Brown
A
udio Right
Pin 8 Brown Audio Right



AUDAC LX523 Specifications

General

Brand	AUDAC
Model	LX523
Category	Speaker System
Language	English