IMEO2 - Quick Start Guide 03
Mounting
1) Attach the wall support bar:
The support bar has to be xed to the wall by four
screws which need to get tted through the provided
slots. The provided slots have an elliptical shape,
allowing the possibility for slightly adjusting the
position to make it perfectly level.
Make sure the appropriate fasteners are used,
depending on the mounting surface
(brick, concrete, wood, ... )
2) Attach the speaker
After the wall support bar is attached and the
connections are made, the soundbar shall be xed
to the wall plate. This is done by sliding the hooks
assembled to the soundbar into the provided slots
on the wall support bar and xing them with security
bolts.
3a) TOP security bolt:
This option can be selected in the situation that
no object is placed above the IMEO2. To prevent
the IMEO2 from falling, attach safety screws on
top of the xing hooks.
3b) BOTTOM security bolt:
There is the option of xing the speaker from
below when an object is placed above of the
IMEO2. Attach the custom safety screws at the
bottom of the xing hooks.
1
3a
3b
2