Chapter 3
Using the ISP40
The ISP40 control and configuration is done through the front panel of the device which
includes a 2.8” graphical LCD display, which is accompanied with four tactile push buttons
(left side) and a rotary selection dial (right side). This combination allows you to navigate
through the systems user interface and access all the available control and configuration
possibilities of the system.
The functionality of the four tactile push buttons on the left side depends on the current
mode and position in the menu structure. Icons on the left side of the display are indicating
the current functionality linked with the buttons.
The rotary selection dial can be used for parameter adjustments and browsing to station lists,
playlists or any other. This multifunctional dial allows easy one-hand operation throughout the
entire menu structure. Browsing is done by rotating it while actions are made by pressing it.
The functionality for each icon is indicated in following table:
ICON DESCRIPTION
Show station list
Go to internet radio settings
Go to general settings
Mark / save current selection as favourite
Go back to system main screen
Go one step back
Erase current selection
To Next Page
Loading...
General