AUDAC SMA Series - Chapter 2: Overview of SMA & SMQ Series; Front Panel Features

10
Technical specifications
Frequency Response (± 3 dB) 20 Hz - 20 kHz
Signal / Noise > 95 dB
THD+N (@ 1 kHz) < 0.05% (1/2 Rated Power)
Crosstalk (@ 1 kHz) > 70 dB
Technology Class-D
Inputs Sensitivity (1W/1m) -19.5 dB ~ 27 dB
Impedance 10 kΩ balanced
Connector XLR & 3-pin Euro Terminal Block (3.81 mm)
Outputs Connector Speakon & 2-pin Euro Terminal Block (5.08mm)
Common mode rejection ratio 70 dB
Damping factor > 200
Protection Amplifier DC Short circuit
Over heating
Over load
Signal limiting
Loudspeaker Power limiter
Access Password and USB key protection
Cooling Temperature controlled FAN
Operating temperature 0° ~ 40° @ 95% Humidity
Power Supply Switching mode
Source 230 ~ 240 V AC / 50 ~ 60 Hz
RMS Power @ 4 Ω Stereo 2 x 500 W
@ 8 Ω Bridge 1000 W
@ 8 Ω Stereo 2 x 300 W
Dimensions (W x H x D) 482 x 88 x 420 mm
Weight 7.400 kg
Mounting 19”
Unit height 2 HE
Construction Steel
Colours Black
Packaging Cardboard box
Shipping weight & volume 10.400 kg - 0.046 Cbm