Need help?Do you have a question about the AUDAC MFA208 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Type | Class D |
| Impedance | 4Ω |
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions | 44 mm |
| Inputs | XLR, RCA |
| Outputs | Speakon, Binding Posts |
| Protection | Overload, Short Circuit, Thermal |
| Input Impedance | 10 kΩ |
| Damping Factor | > 200 |
Diagram illustrating the signal flow and components of the MFA series amplifier.
Warning regarding potential electrical shock and user-serviceable parts inside the unit.
Details international wiring standards for professional audio equipment connections.
Specifies connection details for unbalanced line input using RCA connectors.
Details connection for balanced signal input using a 3-pin terminal block.
Describes serial and network communication ports for system control.
Visual guide to the components and layout of the amplifier's front panel.
Detailed explanation of the front panel controls, display, and connectors.
Overview of navigating and controlling the MFA via its front panel LCD and buttons.
Instructions on how to connect loudspeakers to the amplifier's output terminals.
Guidance on connecting various audio input sources to the amplifier.
Details on setting priority, phantom power, and muting functions for audio inputs.
Overview of advanced settings configurable via the front panel or AUDAC Touch™™ 2.
Safety warning before installing any modules, emphasizing power disconnection.
Detailed technical data, including output power, inputs, outputs, and physical characteristics.
To Next Page
