Need help?Do you have a question about the AUDAC CPR12 and is the answer not in the manual?
Details of the controls and indicators on the front of the CPR12 unit.
Details of the connections and ports on the rear of the CPR12 unit.
Controls for adjusting variable input level with 44dB adjustable ranges.
Indicators warning against clipping on each input channel.
Faders for adjusting the level of each input channel.
3-band equalizers for 6 MIC input channels.
Terminal for DC 24V input and supplying power to other devices.
Inlet for AC power (230V, 50Hz) and fuse replacement.
Jacks for connecting external effectors like compressors and limiters.
Balanced microphone inputs with a wide impedance range.
Switches supplying DC+15V phantom power for condenser microphones.
Describes pinout for balanced XLR connectors: Shield, Pin #2 Positive, Pin #3 Negative.
To Next Page
General
