4. Sub Output
The sub amplifier will be connected to this output terminal. The output signal is a fixed level
signal.
5. Main Output
The main amplifier will be connected to this output terminal.
6. Priority Input
All input signals will be muted automatically by the priority input signal. This terminal will be
used for evacuation announcement.
7. Record Output
This terminal allows recording with a recording device.
8. Line Inputs 6,3 mm jack stereo
These line inputs can be connected to line level equipments. This device allows connecting up to
10 balanced and unbalanced inputs.
9. Line Inputs 2xRCA/Cinch
These line inputs can be connected to line level equipments. This device allows
connecting up to 4 stereo line inputs.
10. Microphone Inputs
This device allows you to connect 6 balanced microphone inputs with an acceptable wide
impedance range from 50ohm to 600ohm.
11. Priority Switches
These switches define the priority of MIC channel 1 and 2. All other input signals except
the priority input channel are muted when this function is activated and there is a signal on
one of the two channels. MIC channel 1 and 2 have the same priority grade as the priority
input channel if these switches are pressed.
12. Phantom Power Switches
This device supplies DC+15V phantom power to use a condenser microphone with MIC1
and 2 channels.
To Next Page
Loading...
Need help?
General
