Need help?Do you have a question about the AUDAC POW2 and is the answer not in the manual?
Introduces the POW2 as a 16-channel amplifier kit for R2/M2 devices, outlining its capabilities and application.
Lists the POW2 kit components and provides instructions for opening the device to begin installation.
Illustrates the amplifier channel layout and the initial placement of ferrite cores on flatcables.
Details attaching loudspeaker output cables to the I/O board and stereo shielded signal cables to the amplifier module.
Guides on aligning, placing, and fixing the amplifier module inside the matrix housing using screws.
Instructions for connecting the mute cable and preparing the power supply unit, including suppression coil attachment.
Details connecting the mains power cable from the large power supply to the small power supply (PowerDSP).
Connects the 28 Volts output from the big power supply to the amplifier module.
Covers final steps like fuse replacement, attaching the option sticker, and system verification.
To Next Page
General
