EasyManua.ls Logo

Audi A3 2012 - Page 23

Audi A3 2012
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruments and warning/indicator lights 21
If the message does not turn off, have your
authorized Audi dealer or qualified workshop
correct the malfunction .
Bil Fuel supply too low
When the (I symbol illuminates, this means
there are about 2.6 gallons (10 liters) of fuel
left in the fuel tank . Time to refuel!
Qpage 191 .
If the symbol lights up, even when there is
ample fuel in the tank, and the text
Tank sys-
tem malfunction! Please contact workshop
appears in the display, there is a fault in the
system. Contact a qualified works hop to have
the fault rectified.
Q Windshield washer fluid level too low
If the I! symbol illuminates, add windshield
washer fluid to the washer system
Qpage211.
~ Defective light bulb warning
The defective light bulb warning tells you
when a vehicle light bulb hos become defec-
tive.
If a defective bulb has been detected by the
system or a light bulb burns out , the ~ sym-
bol with a message appears in the disp lay to
tell you which bu lb is burnt out and where it is
located. For example:
Rear left turn signal
After 5 seconds, th e message disappears . If
you want to recall the message into the dis-
play, press the CH ECK button
Q page 10,
fig. 3 (?).
There are three reasons why the defective
bulb message would app ear in the display:
- The light bulb has burnt out
Q page 246 .
- The fuse is "blown" c> page 243, Replacing
fuses .
- The wire connection to the light bulb is de-
fective.
Have the bulb replaced or the connection re-
paired by your authorized Audi Service depart-
ment .
_& WARNING
- Light bulbs are pressurized and could ex-
plode wh ile they are being changed caus-
ing serious personal injury.
- Work with due care when handling the
high-vo ltage sect ion of gas discharge
(xenon) lamps. Failing to do so could re-
sult in death or serious injury!
BRAKE LIGHT!<@> Brake light defective
In case of a malfunction or component fail-
ure, the symbol (USA models)/
tlJ (Canada models) can appear. The follow-
ing electrical components should be checked,
repaired or replaced , as necessary:
- Brake light bulbs
- All wiring con nections
- Brake light switch
Contact your authori zed Audi dea ler for assis-
tance if necessary.
(D Tips
The brake light switch is only inspected as
part of the functional chec k after the en-
gine is started.
i,0 Headlight range control defective
Applies to vehicles : with dynamic headl ight range adjus t-
ment
If the II illumi nates, the dynamic headlight
range contro l is no longer working properly.
Have the system checked and repaired at your
authori zed Audi dealer.
§'0
Adaptive light defective
Applies to vehicles: with Adaptive Light
FJl Adaptive light defective

Related product manuals