Audi A3 2012 - Page 30

28 Dr ive r information d isplay
Navigating the menu
Use the rocker switch on the windshield wiper
lever and the
I Reset I button to operate the
menu and carry out inquiries and selections .
Fig. 14 Wiper lever: Controls for th e menu display
Fig. 15 Display: Start menu
I Reset I button @ and rocker switch @
q fig. 14 functions:
To open the menu
.,. Press the I Reset I button @ until the menu
display ¢
fig. 15 appears
Selections and settings
.,. Press the rocker switch @ to reach a menu
display . The switch is operated the same as
the display (up/down) .
Entering and confirming
.,. Press the !Reset I button @ .
Returning to the Start menu
.,. Press the !Reset I button longer than 2 sec-
onds to return from any menu level to the
Start menu.
Using the rocker switch, you can select the
menus in the disp lay or change sett ings. A
....
0
....
0
-',
a,
<D
cursor appears on the left in front of these-
lected values.
By press ing the
I Reset ! button, you activate
the selection you made or confi rm the values
you set.
Selected functions are identified with
a check mark or are carried out directly .
Mean ings of the symbols in the display :
Selec-
Selected funct ion
Mean ing
tion bar
>
Cursor Current Selec-
tion
Check mark Selected or
Function active
D
Box Not selected
Triangle pointing Previous page
up
Triangle pointing IINext page
down
Selecting settings
The Driver Information System settings are
menu -guided .
Fig. 16 Display: Menu Sett ings, computer selected
(page 1)
Select your settings as follows:
.,. Press the
I Re set I button . The Start menu
appears
~ page 2 7, fig. 13 .
.,. Press the rocker switch until Set is dis-
played .
.....
0
i
.,. Press the I Reset I button. All the menus ap-
pear .
.,. Press the rocker switch until the desired line
is highlighted (cursor)
¢ fig. 16 .
.,. Press the I Reset ! button.
....