64 Seats and storage
- Because the driver seat can be electrical-
ly adjusted with the ignition key re-
moved, never leave children unattended
in the vehicle . Unsupervised use of the
electric seat adjustments may cause seri-
ous injury.
Adjusting the seatback
Applies to vehicles: with power driver seat
u-
Fig. 67 Driver's seat: switc h for seatback adjustment
• Push or pull the top of the switch in the
same direction you like the seatback to tilt
¢fi g. 67.
A WARNING
- Never adjust the seatback while the vehi-
cle is moving. If you adjust your seatback
while the vehicle is moving, you will be
out of pos ition. Always adjust the seat-
back when the vehicle is not moving.
- To redu ce the risk of injury in the case of
sudden bra king or accident, front pas-
sengers must never ride in a moving ve-
hicle with the seatback reclined. Safety
belts and the airbag system only offe r
maximum protection when the seatback
is upright and the safety belts are prop-
er ly posit ioned on the body. The more
the seatback is reclined, the greate r the
risk of personal injury from an incorrect
seating posit ion and improperly posi-
tioned safety belts!
Adjusting the lumbar
support
Applies to vehicles: with lumbar support
The lumbar support can be adjusted to fit the
natural curvature of the occupant's spine.
Fig. 68 Driver seat: switch for lumbar adj ustment
Adj usting the curvature
.,. Push t he front of t he switch plate c:> fig. 68
in order to increase the curvatu re.
• Push the rear of the switch plate in order to
decrease the curvature.
Adjusting the height
• Push on the top of the switch plate in order
t o move the support higher .
• Push on the bottom of the switch plate in
order to move t he support lower.
A WARNING
-
Never adjust the lumbar support while the
vehicle is moving. If you adjust your seat
while the vehicle is moving, you will be out
of position. Always adjust the lumbar sup-
port when the vehicle is not moving .
To Next Page
Loading...
