2.4 A/C Service Station
⇒ “2.4.1 A/C System, Operating after Charging“, page 79
⇒ “2.4.2 Using Service Station“, page 80
⇒ “2.4.3 Charging Refrigerant Circuit“, page 83
⇒ “2.4.4 Connecting for Measuring and Testing, Two Service
Connections“, page 83
⇒ “2.4.5 Connecting for Measuring and Testing, One Service
Connection“, page 84
⇒ “2.4.6 Connecting for Measuring and Testing, No Service Con‐
nection“, page 85
⇒ “2.4.7 Connecting With Air Conditioning Adapter Set V.A.G
1786 “, page 86
⇒ “2.4.8 Connecting With Adapter Set VAG1785/10 “, page 87
⇒ “2.4.9 Draining Refrigerant Circuit“, page 87
⇒ “2.4.10 Draining Service Station“, page 88
⇒ “2.4.11 Evacuating Refrigerant Circuit“, page 89
⇒ “2.4.12 Transferring Refrigerant To Reservoir (Charging Cylin‐
der Or Reservoir Bottle) Of Service Station“, page 93
2.4.1 A/C System, Operating after Charging
Note
If the compressor has been removed, rotate it about 10 times by
hand prior to initial start-up (when or after installing, for example
prior to installing the ribbed belt) to prevent damage caused by
liquid impact when first switched on (any oil in compressor cylin‐
der is forced out on rotation).
Audi 100 1991 ➤ , Audi 80 1992 ➤ , Audi A1 2011 ➤ , Audi A2 2001 ➤ , A ...
Refrigerant R134a Servicing - Edition 01.2011
2. Description and Operation 79