8
647_010
647_011
647_012
MMI radio plus with Connectivity Package
If customers cannot decide whether or not they want a navigation
system when ordering a new vehicle, they have the option of
selecting the MMI Radio plus (I8E) with Connectivity Package
(PNV). In this case, the requisite navigation hardware is pre-
installed in the information electronics control unit 1 J794. Techni-
cally, the unit is based on the second-generation MIB Scale system.
It has the following features:
• Radio with phase diversity, FM dual tuner (very high frequency)
and AM tuner (medium wave)
• Single CD drive for audio playback (mp3, wma, aac, etc.)
• 2 SDXC card reader for audio playback (mp3, wma, aac, etc.)
• Internal audio amplifier rated at 4 x 20 watts (8RM)
• 800 x 480 pixel video output
• 7.0" MMI display
• Remote control panel in the centre console
• Audi music interface and Audi smartphone interface with 2 USB
ports and AUX-In jack (UI2)
• Bluetooth interface for HFP and A2DP (9ZX)
• Speech dialogue system
• Prewired for navigation
It may also have the following options:
• Audi phone box (9ZE)
• Internal audio amplifier for Audi sound system rated at
180 watts (9VD)
• External audio amplifier for Bang & Olufsen Sound System with
3D sound and more than 700watts power output (9VS)
• DAB tuner (digital radio) (QV3)
If the vehicle has the PR numbers "I8S" plus "7UH", this means
that it has MMI Scale with navigation prewiring (MMI Radio plus
with Connectivity Package).
The procedure for activating the navigation system is the same as
for the previous systems with Connectivity Package. Once the
navigation system has been activated, it has the same features as
the MMI Navigation system, but no data module.
Display with MMI Radio plus with Connectivity Package
J794 with MMI Radio plus with Connectivity Package
Back panel of J794 with MMI Radio
plus with Connectivity Package
GPS
FM1/AM
FM2
LVDS to MMI display
AMI USB
MOST bus
DAB
Settings
Audi smartphone
Audi connect
Map
Navigation
To Next Page
Loading...
