Audi A5 2016 - Page 86

1 - O-rings
❑ Renew after removing
2 - ATF pipe
❑ Renew after removing
3 - O-rings
❑ Renew after removing
4 - ATF cooler
❑ Removing and installing
⇒ page 83
5 - Guard plate
❑ Depending on version
6 - Bolt
❑ 8 Nm
7 - Bracket
8 - Bolt
❑ Tightening torque and
sequence ⇒ page 82
9 - Bolt
❑ Tightening torque and
sequence ⇒ page 82
10 - Coolant hoses
11 - Bolt
❑ Tightening torque and
sequence ⇒ page 82
ATF cooler - tightening torque and sequence
– Tighten bolts in stages in the sequence described:
Stage Bolts Tightening torque/angle specification
1. -1- Screw in by hand until contact is made
2. -1- 3 Nm + 90°
3. -2, 3- Screw in by hand until contact is made
4. -2, 3- 3 Nm + 30°
Drain plugs and screw plugs
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
82 Rep. gr.34 - Controls, housing