19
Reading in the memory control panel
393_030
Memory operating unit, driver seat
E97
Driver door control unit
J386
from onboard power
supply control unit J519
Terminal 58s
Terminal 3 1
Emergency
CAN-high
CAN-low
Terminal 3 0
Terminal 3 1
LED SET
SET
P1 / P2
Termin al 3 1
Termin al 3 1
ON / OFF
Terminal 30g
Emergency OFF
Legend
1 SET button for programming the seat memory
2 P1 button - memory location 1
3 P2 button - memory location 2
4 Function indicator LED in SET button, indicates when saving is in progress
5 Function indicator LED in ON/OFF switch
6 ON/OFF switch for activating or deactivating the seat memory
7 Locating light which illuminates the four keys at dusk or in darkness
8 Electrical interface to the seat control unit
To Next Page
Loading...
