Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove bolts -arrows- on bracket (front) -2-, swivel coolant
expansion tank -1- to one side and secure tank.
– Take care not to damage the red warning label on the power
and control electronics for electric drive - JX1- .
– Unplug connectors on power and control electronics for elec‐
tric drive - JX1- .
– Push locking mechanism -5- in direction of -arrow- and, start‐
ing from the right, release and unplug high-voltage wire for
electrical air conditioner compressor - P3- -3- using release
tool - T40258- .
Caution
Only unplug high-voltage connectors by pulling them upwards.
Do NOT rotate or tilt them; this could damage the coding on
the high-voltage wires.
Audi A6 2011 ➤ , Audi A6 Avant 2011 ➤
Electrical system, hybrid - Edition 03.2014
30 Rep. gr.93 - Electric drive systems
To Next Page
Loading...
